Proprietary Products for Integrated Hydraulic Systems
Celebrating 20 years of continuous improvement in developing proprietary products for integrated hydraulic systems.

Adaflange and Adaport Adapters
Available with 37° Flare, NPTF threads or SAE straight O-Ring stud ends. ISO "M" thread O-Ring stud ends, O-Ring face seal and British threads are also available.

Adaflange™ Unified Code U61 Flange Adapters
The Adaflange™ Unified Code U61 2-bolt flange adapters have bolt patterns that will mount on either of the two diagonal tapped holes on SAE Code 61 flange ports.

Port Connectors
Adaconn™ Port Connectors, permits the ability to mechanically connect Adaflange™ and/or Adaflangeport™ Adapters with 37º Flare Fitting Male Ends together in a manner that enhances the pressure capability of the 37º flare fitting connection.

2 Port Directional Ball Valve Flange Type
Ball Valves are made as modular S.A.E. 4 - Bolt Flange Bodies that permit them to be directly connected to hydraulic components and manifolds in the most effective manner and eliminate the need for additional piping connections.

3 Port Diverter Ball Valve
Ball Valves are made as modular S.A.E. 4 - Bolt Flange Bodies that permit them to be directly connected to hydraulic components and manifolds in the most effective manner and eliminate the need for additional piping connections.

90° Flange 4-Bolt Rotational Retaining Adapters
Inserta™ 90º Flange Rotational Retaining Adapters provide the means to retain other Inserta™ products in a compact assembly with socket head threaded fasteners.

90° Flange Rotational Connectors
Inserta™ 90º Flange Rotational Connectors offers one the means to integrate Inserta™ S.A.E
4 bolt-port pattern modules into stand-alone system assemblies.

Bolt Kits
Adaconn™ ABK and Inserta™ IBK Bolt Kits are used for joining Adaconn™ + Inserta™ products.

Thread-In Check Valves
Inserta™ ICT Thread-In
Check Valves can be inserted in manifolds, subplates, flanges or integrated valve systems.

Slip-In Check Valves
INSERTA™ ICS Slip-In Check Valves can be inserted in manifolds, subplates, flanges or integrated valve systems.

Check Carrier Thread-In Type
Inserta™ ICC Check Valve Carriers, Thread-in Type, provide a convenient and effective way to install an Inserta™ ICS Slip-In Type Check Valves, in a hydraulic system that uses SAE threaded ports.

Check Valve Body Flange Type
Inserta™ Check Valves can be incorporated into a manifold design to control the flow path, reduce the size of the manifold, as well as reduce the cost of design and manufacture.

Check Valve Body w/Support Member Flange Type
INSERTA™ ICFS Check Valve Bodies, Flange Type, with their Support Members provide a simple way to install the same nominal size Check Valve or Fixed Orifice Flow Control Valve in a piping system that uses SAE 4-Bolt flange patterns.

Check Valve Body 4-Bolt Flange Type
Inserta™ ICFT Check Valves, Flange Type, provide an effective way to install a Check Valve or Fixed Orifice Flow Control Valve in a piping system that uses SAE 4-Bolt flange ports.

Modular Connector Code 61 & 62 4-Bolt Flange
Inserta™ Flange Type Modular Connectors provide the means for one to mechanically connect SAE Code 61 and Code 62 four bolt flange port components and other Inserta™ products to these elbows, tees and crosses to form an effective integrated hydraulic system.

Modular Connector Code U61 4-Bolt Flange
The Inserta™ Unified Code U61 4-Bolt Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings.

Specialty Flange Plates
Inserta™ Specialty Flange Plates provides great flexibility in the assembly of Inserta™ modular valves and connectors.

Contact Information for Inserta
538 Township Line Rd
Blue Bell, PA. 19422
(215) 643-0192
Fax (215) 643-4017

Contact Information for Adaconn
538 Township Line Rd
Blue Bell, PA 19422
(215) 643-1900
Fax (215) 643-4017